Sensor Edition: sensors_lorawan

Configuration

The application behavior can be adjusted by modifying conf/app_conf.h.

GNSE_ADVANCED_TRACER_ENABLE enables UART (115200/8-N-1) logging of application activity:

#define GNSE_ADVANCED_TRACER_ENABLE 1

DEBUGGER_ON enables the use of a debugger in low power mode:

#define DEBUGGER_ON       1

Note:

Please keep in mind that it is best to disable the tracer and debugger functionalities to reduce power consumption.

APPEUI, DEVEUI and APPKEY allow the device to join the LoRaWAN network via OTAA:

#define APPEUI                 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00

#define DEVEUI                 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00

#define APPKEY                 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00

Note:

The default 0x00 is a place holder and you are required to change these values in order to achieve a successful activation. For testing purposes, these values can be random.

SENSORS_PAYLOAD_APP_PORT defines LoRaWAN application port where sensors information can be retrieved by the application server:

#define SENSORS_PAYLOAD_APP_PORT        2

SENSORS_TX_DUTYCYCLE in millisecond defines the application data transmission interval:

#define SENSORS_TX_DUTYCYCLE                            10000

← Sensor Edition: sensors_lorawan Setup →